New Firmware Released for Citel C4110 SIP / IAX Phone

Posted by Cory Andrews on May 27th, 2009 in Announcements

Citel has recently released new firmware which corrects several issues with the C4110 SIP/IAX Phone.

You can download the latest firmware below. NOTE: the file is a .z file which will directly load to the phone; you don’t need to unzip it.

Citel C4110 Firmware Link

Amongst the issues corrected in this firmware release are:

Daylight saving time now works properly for SNTP settings. The default dates are now correct for the USA.
Improved DTMF
Config download via FTP/HTTP now working on the AUTO PROVISION interface.

The Citel C4110 supports both SIP and IAX2 protocol, and is now shipping at VoIPSupply.com

Tags: c4110, citel, iax

Introducing Reclaim

Cisco AXP Developer Contest Produces Some Interesting Applications

VoIP Insider Named a Top 10 Telecommunications Blog

Aastra Joins High Definition VoIP Arms Race with Hi-Q

Who’s Ready for Polycom’s 3.2.0 SIP Firmware Release?

5 comments - Leave yours here.

Amir
July 28th, 2009 at 10:02 am

the firmware is bad. doesn’t loads…
Cory Andrews
July 28th, 2009 at 1:37 pm

Amir – we have performed the firmware upgrade here without a hitch….please follow these directions:

I have performed this upgrade to our Citel C4110. Here is the process I took:

-Save the .z file to your local desktop -Don’t make any changes to it.
-With the Citel C4110 on the same network as your PC, gather the IP address of the Citel phone.
-From your PC, Open Internet Explorer and browse to the Citel’s LAN IP address in the address bar.
-Upload the new firmware zip file.
Amir
July 29th, 2009 at 7:06 pm

I tried exactly that but got the “update fail!” messgae. I also tried through TFTP but with no success.

No matter the issue with the firmware my primary concern/issue is with the IAX configuration-

I got it registering, it even receives calls but I can’t make outbound calls. Now, while going through Citel’s manual I noticed that there should be a check box in the IAX configuration telling the device that the IAX is the default protocol for outgoing calls (page 26). I can’t find that check box no where.

The software version I have is: VOIP PHONE V1.7.277.280

The version they seemed to be using while writing this manual was V1.7.64.52 (top screenshot, page 18)

I’m using the latest downloadable firmware from Citel’s website.

Any insight would be appreciated.
Alex
September 27th, 2009 at 10:27 am

they have now released another New Firmwarein sept ,it works for me.
Amir
September 27th, 2009 at 2:07 pm

Thanks Alex. I’ll try it on a test ing device. Do you know if they have release notes for it?

VoIP Links

About us

The VoIP Insider is a leading resource for consumers, business professionals and industry executives seeking inside information, news and reviews on the latest from the VoIP industry. Produced by VoIP Supply, the leading supplier of VoIP equipment and systems since 2002, the VoIP Insider is written by industry insiders who work with VoIP technology every single day.

VoIP Insider

Categories

VoIP Buyers Guides

Newsletter

Archives